1. Home
  2. PRODUCTS
  3. SP10 / AM625 / Kits
  4. Asphalt Anchor BoltHold AM625 Molded Plastic, Pack of 6 anchors
Asphalt Anchor BoltHold AM625 Molded Plastic,  Pack of 6 anchors
1,500 lbs. Molded Anchor

Asphalt Anchor BoltHold AM625 Molded Plastic, Pack of 6 anchors

Write a Review
$35.00
Retail Price:$37.50
You Save:$2.50(7%)
Plastic Asphalt Anchor with screw and washer, 6" long, 1,500 lbs. pull rated, set of 6
Part Number: 01-7625.K
Availability: Available Mid December 2021. On hand:0
  • Items per carton: 6
  • Requires: Adhesive grout EPX2 or EPX3 per table on this page
  • Tools Required: Hammer Drill, 7/8" drill, Torx T30 drive bit
  • Special Features:: Won't rust, same ratings as SP10
Below are alternate anchors:
Quantity Price
4 - 7 $33.25
8 - 15 $31.50
16 - 35 $29.75
36+ $28.00

The BoltHold AM625 is a set of 6 asphalt anchors rated at 1,500 lbs. pull. The 6" long anchor is designed to mount bike racks, signs, machinery directly to asphalt surfaces. For technical information please select the tabs above.

These plastic anchors come with a 1.5" long 1/4" thread cutting screw and a washer.  The screw has a T30 (Torx) head.  It accommodates mounting plates up to 1" thick.  The anchor requires a 7/8" hole, 6" deep, and the use of an adhesive grout such as our EPX2 or EPX3. A 1.2" head at the top of the anchor prevents the anchor from dropping below the surface as well as preventing the anchor from being pulled up into the mounting plate when the bolt is tightened.

The anchors are mounted flush with the surface of the roadway; attached objects can be removed without leaving dangerous screws or protrusions on the surface.

The AM625K is a set of 6 anchors, (6) ¼" screws and (6) 0.7" washer.  Also included is an graphic installation instruction.

TOP