Cost below rounds UP quantity to full package
The BoltHold AM625 is a set of 6 asphalt anchors rated at 1,500 lbs. pull. The 6" long anchor is designed to mount bike racks, signs, machinery directly to asphalt surfaces. For technical information please select the tabs above. They are molded from a tough polycarbonate engineering resin with high force resistance. The anchors can resist temperatures in excess of 140F.
These molded anchors come with a 1.5" long 1/4" thread cutting screw and a washer. The screw has a T30 (Torx) head. It accommodates mounting plates up to 1" thick. The anchor requires a 7/8" hole, 6" deep, and the use of an adhesive grout such as our EPX2 or EPX3 or EPX4. A 1.2" head at the top of the anchor prevents the anchor from dropping below the surface as well as preventing the anchor from being pulled up into the mounting plate when the bolt is tightened.
The anchors are mounted flush with the surface of the roadway; attached objects can be removed without leaving dangerous screws or protrusions on the surface.
The AM625K is a set of 6 anchors, (6) ¼" screws and (6) 0.7" washer. Also included is an graphic installation instruction. T30 insert bits for the screws are available here.