Cost below rounds UP quantity to full package
SP10-3SK is a set of 6 all-stainless steel asphalt anchors rated at 1,500 lbs. pull. The 6" long 5/8" diameter anchors are designed to bike racks, plates, fences, machinery directly to asphalt surfaces. For technical information, datasheets and installation manuals, please visit our main website. The anchor performs well in 2.5" shallow asphalt which is common in parking lots and walkways in the US. The use of Stainless Steel anchors is recommended for applications near potable water, or high salt environment.
The SP10-38S incorporates a 3/8"-16 UNC female thread. The anchor requires a 7/8" hole 6" deep and the use of a grout such as our EPX2 or EPX3. A 1.4" head at the top of the anchor prevents the anchor from dropping below the surface. The SP10 anchors are mounted flush with the surface of the roadway, so that attached devices can be removed without leaving dangerous screws or protrusions on the walkway.
KIT: The SP10-3SK is a set of 6 anchors, each pre-installed with a 3/8" x 1" SS bolt and 1" diameter SS washer.
SHIPPING/EXPORT: This product ships under HTS (Harmonized Tariff 7318.19.0000) and trucking schedule 55.