SPECIAL ORDER ONLY
The BoltHold SP10-M10 is an asphalt anchors rated at 680 Kg pull. The 150 mm long anchor is designed to mount bike racks, signs, machinery directly to asphalt surfaces. For technical information please select the tabs above or visit our main website.
Each anchor incorporates a M10x1.25mm female thread. The length of the bolt inside the anchor should not exceed 100mm. The anchor requires a 22mm hole, 150mm deep, and the use of a grout such as our AGe2 or EPX3 or EPX2. A 37mm header at the top of the anchor prevents the anchor from dropping below the surface as well as preventing the anchor from being pulled up into the mounting plate when the bolt is tightened.
The anchors are mounted flush with the surface of the roadway; attached objects can be removed without leaving dangerous screws or protrusions on the surface.
The part number 01-6310.M1K is a set of 6 zinc plated steel anchors SP10-M10, each pre-installed with a 25mm bolt and a 25mm diameter washer.