1. Home
  2. PRODUCTS
  3. Metric Anchors
  4. Asphalt Anchor BoltHold SP12-M10 6-PACK
Asphalt Anchor BoltHold SP12-M10 6-PACK
SP12-38K SIX-PACK (6) Asphalt Anchors, 3/8

Asphalt Anchor BoltHold SP12-M10 6-PACK

$51.00
300mm long. M10mm Female thread, with bolt and washer; 900 kg. Pull Rated
Part Number: 01-6315.M1K
Availability: Contact Factory to Place order
  • Items per carton: 6
  • Requires: Ses calculator on this page
  • Warranty: 90 days
  • HS Code (Export): 7318.19
  • NMFC code (trucking): 50
Quantity Price
36+ $40.80

SPECIAL ORDER ONLY

The BoltHold SP12 is a heavy duty asphalt anchor rated at 900 Kg. pull. The 300 mm long anchor is designed to mount plates, fences, machinery directly to asphalt surfaces.  For technical information, datasheets and installation manuals, please visit our main website.  

SP12-M10 incorporates a M10-1.25 mm female thread.  The thread of the bolt inside the anchor should not exceed 5".   The anchor requires a 22mm hole 300mm deep and the use of a grout such as our EPX2 or EPX3  A 37mm welded washer at the top of the anchor prevents the anchor from dropping below the surface.  The SP12 anchors are mounted flush with the surface of the roadway, so that attached devices can be removed without leaving dangerous screws or protrusions on the walkway.  

The SP12-M1K is a set of 6 anchors, each pre-installed with a 25mm bolt and a 25mm washer.

TOP