1. Home
  3. Grout/Epoxy
  4. BoltHold EPX5 Anchoring Epoxy Cartridge - Hi Strength
BoltHold EPX5 Anchoring Epoxy Cartridge - Hi Strength
Epoxy Cartridge Hi-strength

BoltHold EPX5 Anchoring Epoxy Cartridge - Hi Strength

EPX5 wide-temperature-range grout
Part Number: 82-6005
Availability: stock:69
Shipping Weight: 2 lbs per unit
Below are alternate adhesives
Quantity Price
6 - 11 $22.32
12 - 23 $21.12
24+ $20.40

The EPX5 is a two-component epoxy adhesive-grout particularly suitable for anchoring into asphalt.  The grout can be applied at temperatures as low as 14ºF.  

The grout fills the crevices in the asphalt as it cures, forming a strong mechanical bond with the asphalt on the one hand, and with the anchor on the other. This is a stress-free bond that does not weaken with time. 

The EPX5 is supplied as a single 10 oz. cartridge that fits a single-tube caulk gun.  We recommend the use of our CG40 hi-thrust caulk gun with 40:1 mechanical gain.  The cartridge contains both parts of the resin. A static mixing nozzle (shown next to the cartridge in the picture on top of the page) fits on the thread at the top of the cartridge, and will discharge a proper mix of the two resin components.  One nozzle is supplied with the cartridge.  

The EPX5 is suitable for use where it may come into contact with potable water.  It is our strongest adhesive, and increases the pull resistance of all anchors by 15%.

To see how many cartridges you need for the job, use our Grout Calculator.