1. Home
  3. Bike Racks
  4. BoltHold SP10-38 Asphalt Anchor Zinc plated (6-Pack)
BoltHold SP10-38 Asphalt Anchor Zinc plated (6-Pack)
SP10 Zinc Plated Steel

BoltHold SP10-38 Asphalt Anchor Zinc plated (6-Pack)

Znc plated 6" long 3/8" female thread, with bolt/washer, 1,500 lb. pull rated
Part Number: 01-6310.38K
Availability: In Stock.1412
Shipping Weight: 2.5 lbs per unit
  • Items per carton: 6
  • Requires: EPX2, EPX3 or EPX5 grout per calculator on this page
  • Warranty: 90 days
  • HS Code (Export): 7318.19
  • NMFC code (trucking): 55
  • Shipping Weight: 2.5 lbs.
Quantity Price
1 - 3 $60.00
4 - 7 $57.00
8 - 15 $54.00
16 - 35 $51.00
36+ $48.00

The BoltHold SP10-38K is a set of 6 asphalt anchors rated at 1,500 lbs. pull. The 6" long anchor is designed to mount bike racks, signs, light machinery directly to asphalt surfaces. For technical information please select the tabs above or visit our main website and search "SP10".

Each anchor incorporates a 3/8"-16 UNC (coarse) female thread. The length of the bolt inside the anchor should not exceed 3". The anchor requires a 7/8" hole, 6" deep, and the use of a grout such as our EPX2 or EPX3. A 1.4" header at the top of the anchor prevents the anchor from dropping below the surface as well as preventing the anchor from being pulled up into the mounting plate when the bolt is tightened.

The anchors are mounted flush with the surface of the roadway; attached objects can be removed without leaving dangerous screws or protrusions on the surface.

The SP10-38K is a set of 6 anchors, each pre-installed with a 1" long bolt and a 1" diameter washer.  Shipping weight 2.5 lbs.