Shown below are full package prices without volume discounts
This drill bit is suitable for installing the SP10 asphalt anchors. The bit can drill to a depth of 8" through asphalt, gravel and earth. The shank is SDS+ compatible.
SDS+ shank drill bits have two deep slots and two shallow slots on the shank for additional hold in your rotary hammer. Shank diameter is 0.393". Use with an SDS+ drive rotary hammer. Total length of drill bit is 10"(may vary depending on the source of the drill bit.)
The bit has carbide tips for long life. Carbide is preferred over diamond tips as the hole they dril in asphalt is rougher, promoting improved adhesion between the asphalt and the adhesive grout. The hole still needs to be carefully cleaned from dust using compressed air. While bit life varies with the surface of the asphalt and the gravel under it, we had reports of drilling 300 holes with one bit.
Please consult our installation manual for anchor use instructions
