1. Home
  2. UK Home Page

The BoltHold family of anchors is designed specifically for mounting to asphalt. Anchors must be installed using our AGe2 grout. Grout is not included with the anchors and needs to be ordered as a separate line item. The products listed below are available through Amazon.co.uk for immediate delivery. These Metric anchors are not available from our US store.

Asphalt Anchor BoltHold SP10-M10 6-Pack

SP10-M10 BoltHold asphalt anchor is flush mounted to asphalt and accepts M10 bolts. These anchors are made of carbon steel and are zinc plated. They are supplied with a bolt and a washer.

Click to check availability in UK

Asphalt Anchor BoltHold SP10-M10 6-Pack

SP10-M10 BoltHold asphalt anchor is flush mounted to asphalt and accepts M10 bolts. These anchors are made of stainless steel and are provided with stainless steel bolt and washer.

Click to check availability in UK

Asphalt Anchor BoltHold SP18-M12 6-Pack

SP18-M12 BoltHold asphalt anchor is flush mounted to asphalt and accepts M12 bolts. These anchors are made of Zinc plated carbon steel and are provided with a bolt and a washer.

Click to check availability in UK

Asphalt Anchor BoltHold SP18-M12 6-Pack

SP18-M12 BoltHold asphalt anchor is flush mounted to asphalt and accepts M12 bolts. These anchors are made of stainless steel and are provided with stainless steel bolt and washer.

Click to check availability in UK

Asphalt Anchor BoltHold AGe2

BoltHold AGe2 anchoring grout is a special expanding cement that provide a stress-free bond between the anchors and the asphalt.

Click to check availability in UK

Asphalt Anchor BoltHold ThreadGuards

The BoltHold ThreadGuards are plastic caps to protect the internal threads of SP10 anchors when the anchors are installed but not used.

Click to check availability in UK

Asphalt Anchor BoltHold ThreadGuards

The BoltHold ThreadGuards are plastic caps to protect the internal threads of SP18 anchors when the anchors are installed but not used.

Click to check availability in UK

Asphalt Anchor BoltHold SP10-38 6-Pack

The Flattener is a tool required ONLY if it is desired to have the head of the anchor truly flush with the asphalt. Usually the head is 2 mm above ground.

Click to check availability in UK

TOP